Rs 232 Software

Bill Serial Port Monitor utility is an interactive and graphical utility. It is specifically designed for hardware engineers and administrators. But anybody can use this utility and it may be helpful for everyone.

Exploitation software for ENERCO automatic weather stations operating over several transmission modes : RTC, GSM, RS-232 et Extended RS-232. CimSta have got acquisition, remote maintenance, storing and climatic database management functions.

When using the 9000M2 programming software, TOA recommends the use of a PC with a built-in RS-232 communication port using a straight through RS-232C cable. USB to RS-232 adapters are often unreliable.

The AR8600 communications receiver can be controlled via a serial port of your computer, using a standard RS-232 cable.

RS-232 Monitor convert serial data into ASCII values to pick out hidden spaces and special characters. An added bonus is the Data wedge that sends all incoming serial data to your windows keyboard buffer.

The LogDat1™ (RS-232) software transfers stored data to a computer spreadsheet program.

This software is used to control the SymDec1 and SymDec4 using RS-232 or Ethernet communications. Menu programming will require a way to see the Monitor A output.

The TRC8022 can be update from a pc via its RS-232 connector. - Connect the RS-232 cinnector to the serial port of a computer with the "update" cable supplied with.

Transfer RS-232 signals to be visible in MS software such as notepad,Excel. The application used COM1 port for connection to hardware. It is available as freeware and can be used accordingly.

AMITerm controls Alcorn McBride products using RS-232 or Ethernet. It is good for controlling hardware and troubleshooting. Alcorn McBride provides the latest firmware for your product at no charge.

This is a preference pane that allows configuration of the Emagic Unitor 8 and AMT8 USB midi interfaces. Current version 0.9.5 is nearly complete except for SMPTE timing profiles.

Phone Dial by PC can dial/operate a phone that is using the serial interface RS-232 connected to the PC com port. Phone numbers can be dialed and redialed from any application via customizable hotkeys.

Simple COM command control COM Controller is a simple comms utility to send sets of pre-set commands via RS-232 to other devices. Up to 4 separate devices may be controlled (via 4 instances of the program).

Features full com port control, binary and ASCII data transfer, support for RS 232 and RS 485 standards and ISDN modem support.

The Parani-ESD200 and Parani-ESD210 are Class 2 type of Compact Embedded Bluetooth Serial Modules for RS-232 cable replacement. By default, they support 30 meters of wireless transmit distance.

The Loggy Soft program is used for service of data loggers SRD-99 type. It enables the visualization, archiving and printing of measurements (e.g. temperature, humidity, pressure) stored in SRD-99-type device memory.

SST-2450EXT is a spread spectrum radio modem with RS-232/RS-485 interface port. It is designed for data acquisition and control application between host and remote sensors.

You can use the MCP-5A to create data such as memory channels and menus on a PC by connecting the TH-K20/K40 to the PC by using an optional Programming Cable PG-4Y (RS-232 interface) or KPG-22U (USB 2.0 interface).

With the help of the RM CAN Device Configurator tool, the configuration of various RM devices can be modified easily. The configuration is saved and loaded after a device reset.

SCL Utility has a simple interface and works with all RS-232, RS-485, and Ethernet ports.